Biomass drying and granulating production line
Production capacity (t/h): 1-7
Floor area (㎡): 10*24-15*40
Scope of application: materials such as wood chips, sawdust, bamboo chips, wooden shavings, shavings, medicine residue, wheat straw, rice straw, sorghum straw, corn stalks, potato vines, bean stalks, etc.
Heat source configuration: suitable for multiple fuels
Environmental protection configuration: supporting use of multi-stage dust removal equipment
Product Introduction
  The comprehensive utilization of biomass energy has been increasingly valued by us, and biomass pellet fuel manufacturing equipment has been further developed. In the aspect of biomass energy utilization, due to the high water content of wood chips, sawdust, broken wood, straw, nut shells, etc., direct combustion, low thermal efficiency, incomplete combustion, and gasification of moisture takes away a lot of high-temperature heat energy and produces a lot of smoke. Increase environmental protection and dust removal costs. The general biomass utilization method is: the biomass raw materials are crushed, dried, dehydrated,

deashed, and formed under high pressure, with a moisture content of 12-15%, a calorific value of 4000-4800kcal/kg, and an ash content of ≤1% to make energy-aggregated pellet fuel. ,use.
The company has developed a pellet fuel production line based on market demand. This equipment is suitable for drying wood chips, sawdust, bamboo chips, wooden shavings, shavings, medicine residue, wheat straw, rice straw, sorghum straw, corn stalks, potato vines, bean stalks, etc.

working principle
The processing route adopts the mixing process of primary drying, secondary crushing, continuous feeding and adjusting feeding. The pelletized fuel is formed with high bulk density, particle density and calorific value. It can achieve large-scale, continuous and stable production to meet the needs of biomass pellet fuel industrialization. It is suitable for wood chips, sawdust, bamboo chips, wooden shavings, shavings, barley straw, oat straw, wheat straw, rye straw, rice straw, Sorghum stalks, corn stalks, potato vines, bean stalks drying, peanut vines and other materials with 35-65% moisture are dried and formed. According to the characteristics of each biomass material, output size, application requirements, cost control, degree of automation, on-site working conditions, etc., dry forming process technology. The principle of die-roll extrusion is used to process biomass raw materials such as agricultural and forestry residues into solid molding fuels to realize continuous and stable industrialized production. The processing route adopts the mixing process of primary drying, secondary crushing, continuous feeding and adjusting feeding. The forming rate of pelletized fuel reaches 98%, and the bulk density and particle density are high. The products are not only sold in the Chinese market (including Taiwan, Hong Kong, Macau), but also exported to more than 20 countries including the United States, Germany, Britain, Switzerland, Russia, Morocco, Chile, Brazil, Thailand, Vietnam, Laos, Cambodia, Indonesia, and Malaysia country