Coconut bran dryer
Production capacity: customizable
Area: 8*18-10x22㎡
:
Heat source configuration: suitable for multiple fuels
Environmental protection configuration: supporting use of multi-stage dust removal equipment

Product Introduction
Coconut chaff drying equipment, such as three-layer drum dryer, four-wheel drive device, air feeder, etc., has the characteristics of reasonable overall process, simple and easy operation, and good drying effect, which solves the problem of drying coconut chaff. Easy to catch fire, easy to block during transportation and other technical difficulties. It can smoothly dry coconut bran raw materials with a moisture content of about 50% to a moisture content of less than 15%. The finished product is of high quality and is convenient to be made into environmentally friendly products such as coconut bran bricks. It has a broad market prospect.


working principle
Coconut chaff raw material is easy to block due to its high friction coefficient. We use a wind conveying system to send it to the inner layer of the three-layer rotary drying drum. The inner drum is divided into three working areas: one is the guide area, where wet materials enter this area and high temperature The hot air contact quickly evaporates the moisture, and the material is moved by the guide plate with a large angle, and the material is guided to the next working area without forming a bond; the second is to pick up the cleaning area, where the wet material is copied by the plate at different angles When the material falls, it is easy to form a phenomenon of sticking to the wall of the drum. In this area, the equipment is designed with a cleaning device, which automatically cleans the inner wall adhesion as the drum rotates. The third is the fast transfer area, where the wet material has been in a low-moisture and loose state, and the material has no adhesion phenomenon in this area, and it quickly flows into the middle drum as the drum rotates.

Because the coconut bran raw material before drying has the characteristics of high water content, easy adhesion, high friction coefficient and easy clogging, the dried coconut bran has the characteristics of light weight, sharp increase in volume, more fiber powder, and easy to catch fire. Based on years of experience in drying equipment manufacturing, our company has designed a set of drying equipment specifically for coconut chaff.
  Coconut chaff raw material is easy to block due to its high friction coefficient. It is sent to the inner layer of the three-layer rotary drum drying drum by a wind conveying system. The inner drum is divided into three working areas. One is the guide area, where wet materials enter this area and high temperature The hot air contact quickly evaporates the moisture, and the material is moved by the guide plate with a large angle, and the material is guided to the next working area without sticking. Instead, it is picked up in the cleaning area. The wet material is in this area due to the plate at different angles. Pick up to form a fully broken fabric curtain state, scattered into a spiral travel type to achieve heat exchange, the material is easy to form a phenomenon of adhesion to the drum wall when falling, in this area because the equipment is designed with a cleaning device, the cleaning device automatically cleans the inner wall with the rotation of the drum Adhesive materials, the third is the rapid transfer zone, wet materials in this zone are in a low-moisture dispersion state, the materials in this zone no longer have the phenomenon of adhesion, and quickly flow into the middle drum as the drum rotates. The middle drum is equipped with a large-angle spiral belt structure that is fully bent and copied. The material moves quickly to the front section of the drum under the combined action of hot air and spiral belts in the middle drum, while absorbing the heat emitted by the inner drum and the heat of the middle drum. Heat exchange, when the material reaches the drying requirement, the material enters the outer cylinder. The material travels in the outer drum in a rectangular multi-loop manner. The material that achieves the drying effect is quickly discharged from the drum under the action of hot air. The wet material that does not achieve the drying effect cannot travel quickly due to its own weight. The material is fully dried in the rectangular plate. The whole drying process