Food waste treatment equipment
Production capacity: customizable
Area: about 120-350㎡
Application range: suitable for food waste disposal
Heat source configuration: suitable for multiple fuels
Environmental protection configuration: supporting use of multi-stage dust removal equipment

Product Introduction
The kitchen waste treatment production line includes kitchen waste organic fertilizer treatment production line, kitchen waste pretreatment production line, kitchen waste black water horsefly treatment production line, etc., including feeding, sorting, solid-liquid separation, crushing, oil-water separation, solid fermentation, Drying and sterilization, odor collection and purification system, PLC automatic control system and other processing units (different kitchen waste processing equipment has different processing procedures). To reduce unwarranted waste of resources and environmental pollution caused by food waste, the system uses a complete set of equipment to process food waste, so that resources can be recycled and food waste can be turned into treasure. It solves the environmental pollution caused by the urban catering group randomly discarding the food waste and not using it.

working principle
For different food waste treatment production line equipment, the following treatment system configurations are different for different details, please contact customer service.

(1) Automatic feeding system: After the food waste is collected and transported to the treatment plant, it is first recorded by the electronic ground weighing measurement data, and then discharged into the food waste storage bin receiving temporary storage tank, and preheated by the heating system , After the double screw feeder is uniformly transported to the double-layer water diversion screw, after the first gravity natural water diversion, the first solid-liquid separation is completed, and the material is uniformly transported;

(2) Automatic sorting system: 1. The first automatic sorting: it is conveyed to the belt-type automatic magnetic separator through the double-layer water-distributing screw auger to carry out the process of removing iron impurities. The iron impurities in the materials are transported on the belt In the process, the material is adsorbed by a strong magnet and removed from the material to complete the first automatic sorting; 2. The second automatic sorting: enter the large trash separator through the belt-type iron remover to remove the larger impurities in the material (such as Large impurities such as chopsticks, beverage bottles, plastic bags, cans buckles, stainless steel, etc.) Through the isolation of the automatic rotating claw and fixed grid of the large impurities remover, the large impurities are removed and automatically fall into the debris storage box , To complete the second automatic sorting; 3. The third automatic sorting: the materials processed by the large miscellaneous materials pass through the screw conveyor and enter the crushing and sorting machine, which can remove the inorganic impurities in the garbage (such as plastic, chopsticks, toothpicks) , Glass, sand, dishes, etc.) to complete the third automatic sorting.

(3) Solid-liquid separation system: The organic matter after automatic sorting and removal is conveyed by a screw conveyor. Under the condition of auxiliary heating, the solid grease in the material becomes liquid grease, under the action of the screw extrusion dehydrator , The solid-liquid separation process is completed by strong extrusion, and the solid organic matter is discharged through the screw conveyor and enters the next process.

(4) Oil-water separation system: The liquid separated by the screw extruder contains crude oil and fat. It is the raw material for making biodiesel and has high economic value. The oil in the liquid can be removed by the three-phase centrifugal oil extractor. The three substances, water and slag, are effectively separated, and can be sold as commodities. The slag can be returned to the organic matter, and the water can be discharged after being processed by the system.

(5) Fermentation system: The material undergoes fermentation treatment through microbial biochemical fermentation and fermentation in the fermentation zone.

(6) Food waste drying system: The food waste inactivates harmful microorganisms in the materials during the high-temperature drying process. There is no need to set up a separate sterilization process, which simplifies the material processing process and saves the need for separate sterilization. Energy, after drying and sterilization, the material is dried to the required moisture.

(7) Odor collection and purification system: The odor in the workshop is collected through various parts, concentrated on dosing, biological spraying dust removal and deodorization filtration, activated carbon adsorption, and then deodorized by plasma photocatalyst anion air deodorization sterilization device Discharge after smell treatment.

(8) PLC automatic control system: The whole production process adopts PLC automatic control system, which has high degree of automation and few people. The control of various indexes can realize automatic adjustment.

Sprayed corn husk dryer
Production capacity (t/d): customizable
Area (㎡): about 5*15~10*22
Applicable materials: suitable for drying corn husk, corn slurry, corn residue, etc.
Heat source configuration: suitable for multiple fuels
Environmental protection configuration: supporting use of multi-stage dust removal equipment

Product Introduction
 Sprayed corn husk not only contains starch, cellulose and other polysaccharides, but also rich in soluble protein and its degradation products, such as peptides, various amino acids, etc.; in addition, it also contains lactic acid, phytate calcium and magnesium salt, soluble Sugars have high nutritional value. The material is not only a high-quality feed material for herbivorous animals (such as cattle, sheep, and herbivorous fish), but also a nutritious feed material for monogastric animals such as pigs and chickens. Corn syrup and corn husks are evenly mixed in the mixer. After mixing, the wet corn husks with 35-40% moisture are transported to the feeder by the feeder, and the corn husks are transported to the drying drum by the feeder. When the evenly distributed plate copying device in the drying drum is turned, it is evenly dispersed and fully contacted with the hot air to achieve the drying purpose of heat and mass transfer. The dried corn husk residue is discharged from the end of the drum through a star discharger, and the dry material is output by the discharger to complete the drying process. After drying, the product passes through the cooling system, and the drying degree of the material is uniform and the color is uniform.

working principle
The sprayed corn husk dryer is mainly composed of heating source, feeder, feeder, rotary drum, discharger, induced draft fan, unloader, power distribution cabinet and cooling system; the working principle is as follows: corn steep liquor and The corn husks are mixed evenly in the mixer. After mixing, the wet corn husks with 35-40% moisture are transported to the feeder by the feeder, and the corn husks are transported to the drying drum by the feeder, and the corn husks are in the drying drum. When the evenly distributed plate copying device is turned, it is evenly dispersed and fully contacted with hot air to achieve the drying purpose of heat and mass transfer. The dried corn husk residue is discharged from the end of the drum through a star discharger, and the dry material is output by the discharger to complete the drying process. After drying, the product passes through a cooling system, and the drying degree and color of the material are uniform, which is very ideal.

Straw dryer
Production capacity (t/d): customizable
Production cycle: 30-50 days
Application scope: drying of barley straw, oat straw, wheat straw, rye straw, rice straw, sorghum stalk, corn stalk, sweet potato stalk, etc.
Heat source configuration: suitable for multiple fuels
Environmental protection configuration: supporting the use of multi-stage dust removal equipment, which can reach environmental protection standards

Product Introduction
Our company can optimize the drying process technology according to the characteristics of each biomass material, output size, application requirements, cost control, and ease of operation. Recommended product: rotary drum dryer. This equipment has large output, high efficiency and energy saving, and has a small footprint. It is more energy-efficient than ordinary dryers and can save energy and drying costs.

working principle
The material first enters the inner layer of the rotary drum from the feeding device to achieve downstream drying. It is continuously picked up and scattered under the inner layer of the copy plate to achieve heat exchange in a spiral manner; then it moves to the other end of the inner layer and enters the middle layer. , Carry out counter-current drying, the middle layer is continuously raised repeatedly, showing a two-step forward and one-step travel mode; then the middle layer can not only fully absorb the heat emitted by the inner drum, but also absorb the heat of the middle drum, and at the same time The drying time is extended, and the material reaches a dry state here. The material travels to the other end of the middle layer and falls into the outer layer. It travels in the outer drum in a rectangular multi-loop manner. The material that achieves the drying effect quickly travels out of the drum under the action of hot air. The wet material that does not achieve the drying effect cannot travel quickly due to its own weight. , Fully dry in this rectangular copy board, thus completing the entire drying process.