Tungsten slag steel slag slag dryer
Production capacity: customizable
Area: 1.5x14-2.2x18㎡
Heat source configuration: suitable for multiple fuels
Environmental protection configuration: supporting use of multi-stage dust removal equipment
Product Introduction
   The slag dryer equipment has made many improvements in the lifting device system, using a multi-combined lifting device, which overcomes the "wind tunnel" phenomenon of the traditional dryer, and reduces the thermal efficiency and coal consumption by about 20%. The transmission gears adopt pin-changeable gears instead of traditional cast steel gears, reducing maintenance costs and time.
    The complete system of tungsten slag dryer consists of three parts: heating system, heat exchange system and ventilation and dust removal system. The heating system part adopts hot air stove technology, which has sufficient heat power, good heat transfer effect and simple structure. The heat exchange system is a three-layer drying drum, and the lifting plates in the cylinder are staggered and arranged in a spiral shape, and the materials are repeatedly sprayed, and the heat exchange efficiency is extremely high. Mainly used in building materials shop

Drying of materials such as slag in the metallurgical industry or metallurgical industry, metal beneficiation mining leaching residue. Slag, limestone, clay, river sand, quartz sand, water slag, coal slime, sludge and other materials with high wetness and high specific gravity can use the slag dryer.

working principle
The complete system of tungsten slag dryer consists of three parts: heating system, heat exchange system and ventilation and dust removal system. The heating system part adopts hot air stove technology, which has sufficient heat power, good heat transfer effect and simple structure. The heat exchange system is a three-layer drying drum, and the lifting plates in the cylinder are staggered and arranged in a spiral shape. It is mainly used for leaching of slag in the building materials industry or metallurgical industry, and metal processing and mining

Drying of slag and other materials. The inside of the dryer is equipped with a combined copy board structure with self-cleaning function. When the wet material enters the dryer, the high-humidity material is copied to the top of the rotating cylinder wall by the copy board, and moves along the combined copy board while the dryer cylinder rotates, and the material on the inner wall of the cylinder and the surface of the copy board automatically It is cleaned up without adding additional power devices, which effectively overcomes the shortcomings of material scarring, sticking to the wall and large chunks. When the material is repeatedly picked up and down, it fully contacts the hot air to complete the heat and mass transfer and realize the drying process.
Steel slag dryer The steel slag dryer has strong overload resistance and large processing capacity. It adopts a downstream drying method. The flue gas and wet materials enter the dryer from the same side. The evaporation strength obtained by the high temperature flue gas and the outlet temperature of the dryer can be used. Low; the operating parameters can be changed according to different material quality, so that the material can form a stable broken fabric curtain in the dryer cylinder, and the mass and heat exchange is more sufficient;