corn flour processing machine

The 30-ton corn processing equipment adopts (full dry method) mixed dehulling and degerming technology, which can simultaneously produce low-fat corn grits and corn flour corn husks of different particle sizes. Corn grits and corn flour are processing companies that use corn as raw materials for food factories, alcohol factories, liquor factories, breweries, lactic acid factories, corn sugar factories, etc. They are also the best food for urban residents to eat coarse grains to improve their lives. Corn husks can be used as feed. . (The corn husks are packaged directly without drying)

1. Technical indicators of this type of corn processing equipment
1. Product types: corn grits, corn flour, corn husks.
2. Power consumption: power consumption per ton of corn is about 50-60 degrees;
3. The output rate of finished products: corn grits and ballast are about 45-55%; corn flour is about 30-20%; corn husks and embryos are about 25%, and the total output rate of corn grits and corn flour is 75-80%.
2. Finished product quality index
1. Corn flour thickness: 40-150 mesh (the thickness can be adjusted arbitrarily).
2. Sand content: not more than 0.002%
3. Magnetic metal content: not more than 0.003g/kg
4. Moisture: storage type: 13.5-14.5%
5. Color and smell: pink, normal smell and taste.
6. Fat content: 1-2%
The process flow of 30-ton corn processing equipment is as follows:
The corn goes through the cleaning sieve to remove impurities and enters the moisturizing hoist. In the moisturizing hoist, the corn processing skin is soaked in water and then enters the storage box, and then enters the peeling crusher. After the corn is peeled and crushed, it enters the embryo extracting machine The germ and the skin are separated, and the corn grits after the peeling and germ removal enters the pulverizer to grind and flow out from the discharge port of the receiver.
Corn-Screening-Moisturizing-Peeling-Stripping-Screening-Germ Extraction-Corn Grits-Milling-Bagging.

The 30-ton corn deep-processing machinery processes 30 tons of raw corn grains daily, and adopts dry-method corn processing technology to achieve a 95% depuration rate of the skin embryo. The corn deep-processing machine can produce refined corn flour (with a fine taste and a fineness of up to 120 mesh) and various corn grains (corn grits). Products such as corn germ and corn husk.


Features:
　　1. Compared with the complete set of corn wet processing technology, it reduces the equipment investment for pre-grain moistening and post-finished product drying;

　　2. The complete set of corn dry processing technology, the material processing process does not need to contact water, the processing is more sanitary, simpler and more labor-saving;

　　3. Use peeling equipment to reduce the loss of endosperm during peeling;

　　4. The streamlined modular design adopts the processing technology of grain cleaning, two peeling and one polishing, and the entire processing process is automated.

　　5. The main components of the equipment are made of alloy materials that meet export standards, which guarantees production efficiency while also taking into account the long-term stability of the equipment, so that users do not spend more money on repairs.

　　6. The investment of the same tonnage is reduced by more than 50%, which is 80% lower than that of its peers.