Broken paper pulping machine-facial tissue pulp processing machine

Product introduction:

The broken paper pulper is mainly used to break up broken paper and various waste paper. The impeller pulper is a horizontal device, and heavy slag accumulates at the bottom of the pool, thereby greatly reducing the wear of the lower sieve plate of the impeller, preventing sand slag from clogging the sieve holes, and achieving continuous operation. This machine has the characteristics of strong dispersing ability, wide adaptability, simple structure, convenient operation and maintenance, etc. It is the ideal equipment for waste paper pulping at present.
Structure principle
The broken paper pulper is mainly composed of rotor, transmission part and other parts.

The rotor level device of the broken paper pulper. When the rotor is running, the water flow is sucked in along the center of the axis and thrown around at a high speed to form a water circulation. The internal friction caused by the tearing of the rotor and the mutual turbulence of the different velocity layers makes the slurry wet Disintegrated and separated fibers are obtained in the state, and the undisintegrated paper and fiber bundles are further disintegrated in the gap between the rotor and the sieve plate. Wet paper and dry paper are input from the feed port above the slurry tank. The separated slurry is produced by the operation of the impeller and the central suction water flows out of the pulper through the sieve plate. Due to the special shape of the broken blade tail, it has a retaining screen. The function of the hole not being blocked.

The end of the slurry tank is equipped with a transmission part, which is composed of a main shaft, a bearing chamber, and a fine slurry chamber. Below the rotor is a sieve plate, and there are a variety of sieve holes for selection. The gap between the rotor and the screen can be adjusted, and the distance between the rotor and the screen is generally 1~2mm.