Chain conveyor-paper processing machine

Structure principle
The chain conveyor is composed of five parts: head drive device, tail wheel device, tension device, chain plate and frame.

Head drive
It consists of a motor, a reducer, a transmission device and a driving sprocket device. The power is transmitted to the main shaft through a pair of sleeve roller sprockets by the driving device, and then drives the groove plate to run. The active sprocket device uses two sprockets with 6 teeth to drive two piece-type traction chains and groove plates to run along the guide rail.
Tail wheel device
The redirecting part of the chain plate of this machine is composed of a tail wheel shaft, two tail wheels and bearings.
Tensioning device
The tensioning device adopts a spiral tensioning method to adjust the tightness of the traction chain.
Chain part
It consists of traction chain and trough plate. The traction chain adopts a piece-type traction chain that is resistant to impact and runs smoothly and reliably. A roller is installed in the middle of the inner chain to roll on the track to reduce frictional resistance and wear. The trough plate is fastened together with the traction chain with bolts.
frame
It is composed of headstock, tailstock and middle frame. It is welded with channel steel, angle steel and reinforced steel plate. There are four tracks for rollers in the middle of the frame, which are made of light rails.